Re: Umax 1200S on LinuxPPC R5

Oliver Rauch (oliver.rauch@Wolfsburg.DE)
Sun, 27 Jun 1999 17:35:37 +0200

--------------A2CDB1E6A1B851BB98D2B18B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Simon Piette wrote:

> Hi Olivier,
>
> I changed my SCSI terminator for an active one, and now scanimage -L see
> my scanner (sge, I change the SCSI ID for 1 , 4 devices on scsi0).
>
> The comments were already there (sane 1.0.1), but it was on the line
> after.
>
> scanimage is nevertheless unable to scan. With export
> SANE_DEBUG_UMAX=10, scanimage -d umax:/dev/sge > out.pnm :
>

Ok.

>
>
> [umax] set_window_param
> [umax] window descriptor block created with 82 bytes
> [umax] window(s) set
> [umax] wait_scanner
> [umax] scanner ready
> [umax] start_scan
> [umax] starting scan
> scanimage: stopping scanner...
> [umax] sane_cancel
> [umax] trying to reposition scanner ...
> scanimage: sanei_scsi.c:1352: sanei_scsi_req_wait: Assertion `req ==
> qhead' failed.
>
> Seems to be related to sane-scsi instead of sane-umax ...
>

Did you press ^C ?
scanimage prints stopping scanner, looks like a termination by scanimage!

Make sure you use the original umax backend (without the comments I sent to you)!

Bye
Oliver

--
EMAIL: Oliver.Rauch@Wolfsburg.DE
WWW: http://www.wolfsburg.de/~rauch

--------------A2CDB1E6A1B851BB98D2B18B Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> Simon Piette wrote:

Hi Olivier,

I changed my SCSI terminator for an active one, and now scanimage -L see
my scanner (sge, I change the SCSI ID for 1 , 4 devices on scsi0).

The comments were already there (sane 1.0.1), but it was on the line
after.

scanimage is nevertheless unable to scan. With export
SANE_DEBUG_UMAX=10, scanimage -d umax:/dev/sge > out.pnm :
 

Ok.
 
 

[umax] set_window_param
[umax] window descriptor block created with 82 bytes
[umax] window(s) set
[umax] wait_scanner
[umax] scanner ready
[umax] start_scan
[umax] starting scan
scanimage: stopping scanner...
[umax] sane_cancel
[umax] trying to reposition scanner ...
scanimage: sanei_scsi.c:1352: sanei_scsi_req_wait: Assertion `req ==
qhead' failed.

Seems to be related to sane-scsi instead of sane-umax ...
 

Did you press ^C ?
scanimage prints stopping scanner, looks like a termination by scanimage!

Make sure you use the original umax backend (without the comments I sent to you)!

Bye
Oliver
 

-- 
EMAIL: Oliver.Rauch@Wolfsburg.DE
WWW: http://www.wolfsburg.de/~rauch
  --------------A2CDB1E6A1B851BB98D2B18B-- -- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com