On Sun, Dec 31, 2000 at 06:42:40PM +0000, Marek Walther wrote:
> I have a problem to use my Epson P1200U over a network client, the
> scanner works on the host there is connect good. On the client
> "scanimage -L" can not found the Scanner.
First try to look only at the server: add localhost to saned.conf and
net.conf. Try scanimage -L. You should get something like:
device mustek:/dev/scanner' is a Mustek ScanExpress 12000SP Plus flatbed scanner
device net:localhost:mustek:/dev/scanner' is a Mustek ScanExpress 12000SP Plus flatbed scanner
(The net: is important is the important part).
If this works, add the IP-address (or name) of your client to the
saned.conf of your server (from your saned.conf it looks like you
forgot to do this).
> ec 31 17:12:51 chaosland saned: access by root@(null) rejected
Your client wasn't allowed to use saned. Maybe there are also problems
with anme-resolution (the "(null)" looks suspicous).
> Configuration Sane on host(Server) /usr/local/sane.d/saned.conf
> --> start
> alias netepson net:localhost:epson:/dev/usbscanner
> alias epson2 epson:/dev/usbscanner
> alias zweiter epson:/dev/usbscanner
> --> stop
Add the name or IP address of your client here (just the name, no alias).
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail firstname.lastname@example.org
This archive was generated by hypermail 2b29 : Sun Dec 31 2000 - 10:02:47 PST