Re: Umax 600s/Adaptec 2906 trouble

From: Mark Stewart (mstewart@atg.com)
Date: Wed Dec 27 2000 - 08:07:50 PST

  • Next message: oliver.rauch@Wolfsburg.DE: "Re: Umax 600s/Adaptec 2906 trouble"

    Hi Rod,

    > >
    > > The Adaptec card is listed (sort of) on Mandrake's supported hardware
    page
    > > (it claims to support Adaptec AHA-29xx PCI which I've assumed, perhaps
    > > wrongly, is a match for my Adaptec 2906). Kudzu also seemed to recognize
    the
    > > card when I first installed it although it thinks it's a
    "Adaptec|AHA-7850".
    > > Its message in /var/log/message was "kudzu: aliased scsi-hostadapter1 as
    > > aic7xxx". Harddrake agrees with this. I'm pretty sure I am hitting the
    right
    > > SCSI channel; /dev/scanner is symlinked from /dev/sga. /dev/sg0 is also
    > > linked to /dev/scanner. Finally, I'm using a good, short SCSI cable
    > > connected directly to the scanner with nothing else on the chain.
    > >
    > And both the 2906 and the scanner are terminated....right?

    Well, the scanner is terminated. How so should the 2906 be terminated?

    ::mark

    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Wed Dec 27 2000 - 07:56:37 PST