something that may have changed inbetween is the SCSI buffer size.
Please try to
Ingo Wichmann wrote:
> Hi Guys!
> I didn't find an answer to this problem in the documentation or the
> mailing-archives of the last months ...
> After updating from SuSE Linux 6.4 to 7.0 my (girlfriend's) scanner doesn't
> work (properly) any more.
> Before that I had no problem with it (and I was quit proud that is was
> running under Linux and under w2000 it is not). Now if I start a scan it
> takes some 10 - 15 Minutes until the scan starts. During that time the
> system is nearly blocked. With some patience I can log in on another console
> and terminate the process. If I don?t terminate it, the scan itself works
> later on at the normal speed, as far as I could tell.
> Even listing the connected scanners with
> scanimage -L
> blocks the system.
> Despite that
> cat /proc/scsi/scsi
> displays the scanner immediately.
> Its an HP ScanJet 6100 C connected to a Symbios 53C416 SCSI Card.
> Kernel is of Version 2.2.16, modified by SuSE. USB or other modules I don't
> need are not loaded.
> SuSE does probably not use the latest Version, but I didn't find anything
> about the problem in the changelog of the last releases.
> Any hints?
> Ingo Wichmann
> Source code, list archive, and docs: http://www.mostang.com/sane/
> To unsubscribe: echo unsubscribe sane-devel | mail firstname.lastname@example.org
-- Peter Kirchgessner http://www.kirchgessner.net mailto:email@example.com
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail firstname.lastname@example.org
This archive was generated by hypermail 2b29 : Sun Dec 10 2000 - 22:37:33 PST