Visioneer Onetouch 7100
Looks like GL646.
Maybe it can be supported by the Genesys-backend once it's ready?
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04a7 ProdID=0229 Rev= 0.00 S: Manufacturer=Visioneer S: Product=USB Scanner C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 48mA I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms <device descriptor of 0x04a7/0x0229 at 001:002 (Visioneer USB Scanner)> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04A7 idProduct 0x0229 bcdDevice 0.00 iManufacturer 1 (Visioneer) iProduct 3 (USB Scanner) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 48 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 16 bInterfaceSubClass 1 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 8 ms bRefresh 0 bSynchAddress 0 found USB scanner (vendor=0x04a7 [Visioneer], product=0x0229 [USB Scanner]) at libusb:001:002 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = 0) checking for GT-6816 ... this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16) checking for MA-1015 ... this is not a MA-1015 (bDeviceClass = 0) checking for MA-1509 ... this is not a MA-1509 (bDeviceClass = 0) checking for LM983[1,2,3] ... this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16) checking for GL646 ... <This USB chip looks like a GL646> found USB scanner (vendor=0x04a7 [Visioneer], product=0x0229 [USB Scanner], chip=GL646) at libusb:004:004
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.