Scanners not supported by SANE

Manufacturer and model

Plustek SmartOffice PL812

Bus type

USB

Vendor ID

0x07b3

Product ID

0x0c0d

Chipset

GL841

Comments

Similar to PL806.

Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv

found USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x0c0d [USB2.0 SCANNER], chip=GL841) at libusb:005:014

$ cat /proc/bus/usb/devices

T:  Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 14 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=07b3 ProdID=0c0d Rev= 5.00
S:  Manufacturer=PLUSTEK INC
S:  Product=USB2.0 SCANNER
S:  SerialNumber=1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=16ms
    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.


SANE homepage
Contact