Scanners not supported by SANE

Manufacturer and model

Nikon Coolscan LS-50 ED / V ED

Bus type

USB

Vendor ID

0x04b0

Product ID

0x4001

Chipset

Analog Devices AD7528JR
AD9240

LB1845
LB1933

TI ULN2004

ISSI IS61C256 (x2)
ISSI IS61C1024 (x3)
MBM29F400B "LS-50"

NEC UPA1603

Philips ISP1581BD CC1961 (at usb plug)

Hitachi H8 HD6413003

Nikon EI-107
    

Comments

Maybe it can be supported by the coolscan2 backend? "garcia _AT_ iwr fzk de" offers to help testing that scanner.

Output of /proc/bus/usb/devices or sane-find-scanner -v -v

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=04b0 ProdID=4001 Rev= 1.02
S:  Manufacturer=Nikon
S:  Product=LS-50 ED
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

<device descriptor of 0x04b0/0x4001 at 001:003 (Nikon LS-50 ED)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          255
bDeviceSubClass       255
bDeviceProtocol       255
bMaxPacketSize0       64
idVendor              0x04B0
idProduct             0x4001
bcdDevice             1.02
iManufacturer         1 (Nikon)
iProduct              2 (LS-50 ED)
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         32
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             2 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      2
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bNumEndpoints = 2)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bcdUSB = 0x110)
    checking for MA-1509 ...
    this is not a MA-1509 (bNumEndpoints = 2)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bDeviceSubClass = 0xff)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bNumEndpoints = 2)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL841 ...
    this is not a GL841 (bcdUSB = 0x110)
    checking for ICM532B ...
  check 5, this is not a ICM532B (bNumEndpoints = 2)
<Couldn't determine the type of the USB chip>

found USB scanner (vendor=0x04b0 [Nikon], product=0x4001 [LS-50 ED]) at libusb:001:003

    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.

Links


SANE homepage
Contact

$Date$ $Author$