Scanners not supported by SANE

Manufacturer and model

Konica Minolta DiMAGE Scan Elite 5400 2

Bus type

USB

Vendor ID

0x132B

Product ID

0x0012

Chipset

Comments

Is reported to be supported by vuescan.

Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv

<device descriptor of 0x132b/0x0012 at 005:007 (KONICA MINOLTA DiMAGE Scan Elite5400 2)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          255
bDeviceSubClass       204
bDeviceProtocol       1
bMaxPacketSize0       64
idVendor              0x132B
idProduct             0x0012
bcdDevice             0.01
iManufacturer         1 (KONICA MINOLTA)
iProduct              2 (DiMAGE Scan Elite5400 2)
iSerialNumber         3 (000000000000)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             2 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    0
   bInterfaceSubClass 0
   bInterfaceProtocol 0
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         7 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bcdUSB = 0x200)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 0)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 0)
    checking for MA-1015 ...
    this is not a MA-1015 (bcdUSB = 0x200)
    checking for MA-1509 ...
    this is not a MA-1509 (bcdUSB = 0x200)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bDeviceClass = 255, bInterfaceClass = 0)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 0)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 255, bInterfaceClass = 0)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceSubClass = 0xcc)
    checking for GL841 ...
    this is not a GL841 (bDeviceClass = 255, bInterfaceClass = 0)
    checking for ICM532B ...
  check 1, this is not a ICM532B (bDeviceClass = 255, bInterfaceClass = 0)
<Couldn't determine the type of the USB chip>

found USB scanner (vendor=0x132b [KONICA MINOLTA], product=0x0012 [DiMAGE Scan Elite5400 2]) at libusb:005:007
    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.

Links


SANE homepage
Contact

$Date$ $Author$