Scanners not supported by SANE

Manufacturer and model

Hewlett-Packard Scanjet 4600
Hewlett-Packard Scanjet 4670

Bus type

USB

Vendor ID

0x03f0

Product ID

0x3005

Chipset

The board contains the following chips: HY57V161610 1M * 16 RAM, A3967SLB motor driver, "HP 163-74-000002" main chip, made by SQ (Service and Quality).

Comments

bxerroz at gmail.com writes: ">s of today 12-04-2005(04/12/2005) i have created NUMEROUS log files for the scanner itself, including Preview Scans, scans at resolutions 200dpi, 1200dpi, 9600dpi, in black and white, and in millions of colors. scaned at sizes, 1x1cm, 13x13cm, and 21.61x29.72cm (scanner max). while i have no place to post, i have an archived file with all of them and can be sent out if desired. i will attempt my best on my doing my own reserch into the driver, but i am vastly lacking in the experience todo so. please email me with any questions or comments, and as i said, i can send the archive at will (its only about 300kb packed, a few megs unpacked)

About the 4670: "The scanner works on Mac OS X (10.3) with HP's supplied software, and so does Adobe Photoshop Elements (with a HP supplied plug-in), but Apple's "Image Capture" does not see it." Another owner of this scanner writes: "Upright scanner, heard it was almost identical to 4660."

The 4670 is the same as the 4600 but has an additional transparency adapter.

In this message on sane-devel, Alexander Bechikov announced he has collected logs for this scanner.

Output of /proc/bus/usb/devices or sane-find-scanner -v -v

4600:
T:  Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=03f0 ProdID=3005 Rev= 1.00
S:  Manufacturer=Hewlett-Packard.
S:  Product=hp scanjet
S:  SerialNumber=CN3B4B502993
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=500us

<device descriptor of 0x03f0/0x3005 at 005:002 (Hewlett-Packard.         hp scanjet                )>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x03F0
idProduct             0x3005
bcdDevice             1.00
iManufacturer         1 (Hewlett-Packard.        )
iProduct              2 (hp scanjet                )
iSerialNumber         3 (CN3AKB565593)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             100 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         3 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bcdUSB = 0x200)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL841 ...
    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for ICM532B ...
  check 1, this is not a ICM532B (bDeviceClass = 0, bInterfaceClass = 255)
<Couldn't determine the type of the USB chip>

found USB scanner (vendor=0x03f0 [Hewlett-Packard.        ], product=0x3005 [hpscanjet                ]) at libusb:005:002


4670:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=03f0 ProdID=3005 Rev= 1.00
S:  Manufacturer=Hewlett-Packard.
S:  Product=hp scanjet
S:  SerialNumber=CN416C298794
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=500us


<device descriptor of 0x03f0/0x3005 at 003:005 (Hewlett-Packard.         hp scanjet                )>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x03F0
idProduct             0x3005
bcdDevice             1.00
iManufacturer         1 (Hewlett-Packard.        )
iProduct              2 (hp scanjet                )
iSerialNumber         3 (CN416C298794)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             100 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         3 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
    this is not a GT-6816 (bcdUSB = 0x200)
    checking for GT-8911 ...
    this is not a GT-8911 (check 2, bcdUSB = 0x200)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bDeviceClass = 0)
    checking for MA-1509 ...
    this is not a MA-1509 (bDeviceClass = 0)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for GL841 ...
    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
    checking for ICM532B ...
    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
    checking for PV8630/LM9830 ...
    this is not a PV8630/LM9830 (bcdUSB = 0x200)
    checking for M011 ...
    this is not a M011 (bDeviceClass = 0)
    checking for RTS8822L-01H ...
    this is not a RTS8822L-01H (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x200, bInterval = 0x0)
    checking for rts8858c ...
    this is not a rts8858c (bcdUSB = 0x200)
    checking for SQ113 ...
<This USB chip looks like a SQ113>

found USB scanner (vendor=0x03f0 [Hewlett-Packard.        ], product=0x3005 [hp scanjet                ], chip=SQ113) at libusb:003:005
    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.


SANE homepage
Contact