Re: Umax Astra 2400S Scsi help

From: Rod Pike (rodneyp@utanet.at)
Date: Thu Feb 22 2001 - 12:22:25 PST

  • Next message: Ulrich Hopp: "Mustek 1200 SP Pro + aha152x + linux 2.4.1 = problem"

    On Wed, Feb 21, 2001 at 05:58:06PM -0500, jorandal wrote:
    > I have purchased a UMAX Astra 2400S scanner and am unable to get it to work in
    > Linux. I think it is the SCSI card. The card that comes with it is a card
    > from Domex which I get the impression does not work with linux.
    >
    > So I bough an Adaptec AHA2940 since it was recomended in the sane-SCSI man
    > page. When I recieved the card however, it definitly does not work with my
    > SCSI cable. The port on the card is wide but very thin whereas the cable
    > that came with my scanner looks more like a parallel cable. Do I need an
    > adapter or a different cable or a different SCSI card. Could somebody
    > recomend something to me that would get me going without spending a lot of
    > money.

    You should be able to find a SCSI-2 to 25 pin DSUB cable at a computer
    store. I would suggest taking the SCSI card and scanner cable to the
    store so you can show them what you need. The other option although not
    as elegant is to use an adapter but I think you'll be happier with the
    right cable.

    Good luck

    Rod

    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Thu Feb 22 2001 - 12:11:52 PST