Oliver,
> >
> > Not too long ago I asked the list (twice) if anyone had any
> recommendations
> > for a SCSI card that has been demonstrated to work with SANE
> and, ideally, a
> > Umax 600S.
> >
> > Is it really the case that no one has any opinion on the matter?
> >
> > If so I'm really bummed as I have had no luck with my cheapo
> Adaptec 2906.
> >
> > ::mark
> >
> > --
> > Source code, list archive, and docs: http://www.mostang.com/sane/
> > To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
>
> Hi Mark,
>
> did you try the card that comes with the scanner,
> it is as bad as the 2906 but some people do work with that card.
>
<<Shiver>> It's an ISA card which I hadn't wanted to really try but if you
say folks have had success with it I guess I'll give it a try. Looking at
the Umax docs it says you don't need to use the provided card if you have an
"Adaptec compliant" card which makes me think the provided ISA card is
itself some type of Adaptec.
One other thing: a while back you recommended that I try making a change to
the umax.c file (#undef HAVE_SANEI_SCSI_OPEN_EXTENDED). That didn't work but
you mentioned one other possibility (though not specifically) that you would
have to check on but didn't immediately have time for. Do you happen to
recall what that was and could I try it now? Only if you have the time, of
course...
::mark
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Wed Feb 14 2001 - 09:24:24 PST