Re: SANE backend for Mustek 1200UB released by Mustek

From: Aristo (
Date: Wed Jan 03 2001 - 09:49:30 PST

  • Next message: Reinout Wijnveen: "Question: automatic preloading scsi/sg modules as non-root"

    > Hi,
    > On Tue, Jan 02, 2001 at 11:27:33PM +0100, wrote:
    > > Tested it with a 1200CU model - it works... (RPM distr. used)
    > My experience with this scanner is that sometimes the first scan works
    > but the following have garbage at the right side of the scan or are
    > completely white. But it doesn't seem to be far from here.
    > More tests:
    > 600 CU: Scan slider moves and bumps at the end of the scan bed. DON'T
    > TRY!
    > 1200 USB: Scan slider moves but image is completely black (this isn't
    > a CIS scanner, so this result was expected).
    > BearPaw 1200: Scanner isn't detected at all (this was expected, the
    > Bearpaw is based on the completely different NS Merlin
    > chip.
    > Bye,
    > Henning

    for my 1200 Cu Plus ( vendor 0x55f, product 0x8, the driver works good.

    Perhaps there is a difference between the normal 1200 CU und the 1200 CU Plus.

    I've tested the driver a view times, an could'nt see somthing wrong.


    Source code, list archive, and docs:
    To unsubscribe: echo unsubscribe sane-devel | mail

    This archive was generated by hypermail 2b29 : Wed Jan 03 2001 - 08:32:00 PST