The scanner moves very slowly, about one motor movememnt (pixel row) every 5
seconds. I included a verbose listing below. When I tried scanning I had to hit
Ctrl-C after about 5 minutes since the scan head looked like it did not move at
all.
I have a Mustek III 600 EP Plus scanner but the listing below says the ASIC ID
is 0xa5 , I thought by the man page that it was supposed to be 1013 or 1015.
Any help is appreciated.
Here is a verbose listing of the scan:
[root@pino anthony]# SANE_DEBUG_MUSTEK_PP=128 scanimage >test.pnm
[sanei_debug] Setting debug level of mustek_pp to 128.
[mustek_pp] init: SANE v1.0.3, backend v1.0.6-alpha
[mustek_pp] I wouldn't let myself be root if I were you...
[mustek_pp] init: option io-mode 2
[mustek_pp] init: option niceload
[mustek_pp] init: trying port `0x378'
[mustek_pp] attach: device 0x378 attached
[mustek_pp] attach: asic 0xa5, ccd 01
[mustek_pp] init: naming device 0x378 '600IIIEPP'
[mustek_pp] init: device 0x378 is from 'Mustek'
[mustek_pp] init: option wait-lamp 15
[mustek_pp] init: setting wait-lamp to 15 for device 600IIIEPP
[mustek_pp] init: option strip-height 16
[mustek_pp] init: setting strip-height to 16 for device 600IIIEPP
[mustek_pp] init: option buffer 122400
[mustek_pp] init: setting buffer to 122400 for device 600IIIEPP
[mustek_pp] open: device `600IIIEPP'
[mustek_pp] open: range (0.0,0.0)-(215.899994,296.333313)
[mustek_pp] init_options(v1.0.6-alpha): line 2701: debug exception
[mustek_pp] ASSERT((dev->asic_id == 0xA8) || ((dev->asic_id == 0xA5) && (dev->ccd_type == 0))) failed
[mustek_pp] expect disaster...
[mustek_pp] config_ccd: 100 dpi, mode 1, invert 0, size 0
[mustek_pp] config_ccd: 0 dpi, mode 0, invert 0, size 0
[mustek_pp] open: success
[mustek_pp] control_option: option 0, action 0
[mustek_pp] control_option: option 0, action 0
[mustek_pp] get_option_descriptor: requested option 0 ((null))
[mustek_pp] get_option_descriptor: requested option 1 ((null))
[mustek_pp] get_option_descriptor: requested option 2 (mode)
[mustek_pp] get_option_descriptor: requested option 3 (resolution)
[mustek_pp] get_option_descriptor: requested option 4 (preview)
[mustek_pp] get_option_descriptor: requested option 5 (preview-in-gray)
[mustek_pp] get_option_descriptor: requested option 6 ((null))
[mustek_pp] get_option_descriptor: requested option 7 (tl-x)
[mustek_pp] get_option_descriptor: requested option 8 (tl-y)
[mustek_pp] get_option_descriptor: requested option 9 (br-x)
[mustek_pp] control_option: option 9, action 0
[mustek_pp] get_option_descriptor: requested option 10 (br-y)
[mustek_pp] control_option: option 10, action 0
[mustek_pp] get_option_descriptor: requested option 11 ((null))
[mustek_pp] get_option_descriptor: requested option 12 (custom-gamma)
[mustek_pp] get_option_descriptor: requested option 13 (gamma-table)
[mustek_pp] get_option_descriptor: requested option 14 (red-gamma-table)
[mustek_pp] get_option_descriptor: requested option 15 (green-gamma-table)
[mustek_pp] get_option_descriptor: requested option 16 (blue-gamma-table)
[mustek_pp] control_option: option 7, action 0
[mustek_pp] control_option: option 8, action 0
[mustek_pp] control_option: option 7, action 0
[mustek_pp] get_option_descriptor: requested option 9 (br-x)
[mustek_pp] control_option: option 9, action 1
[mustek_pp] control_option: option 8, action 0
[mustek_pp] get_option_descriptor: requested option 10 (br-y)
[mustek_pp] control_option: option 10, action 1
[mustek_pp] get_parameters: mode `Color'
[mustek_pp] get_parameters: 600 dpi
[mustek_pp] get_parameters: resolution 600 dpi -> hardware 600 dpi
[mustek_pp] get_parameters: 5100x7000 pixels
[mustek_pp] start: maybe waiting for lamp...
[mustek_pp] config_ccd: 600 dpi, mode 2, invert 0, size 5100
[mustek_pp] config_ccd: 100 dpi, mode 1, invert 0, size 5100
[mustek_pp] config_ccd: 600 dpi, mode 2, invert 0, size 5100
[mustek_pp] start: executing calibration
[mustek_pp] calibrate: ref_black 85, blackpos 251
[mustek_pp] start: device ready for scanning
[mustek_pp] get_parameters: can't set parameters while scanning
[mustek_pp] sane_mustek_pp_get_parameters(v1.0.6-alpha): line 3840: debug exception
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: delivering 24096 bytes
[mustek_pp] read: scanning next 8 lines
scanimage: stopping scanner...
[mustek_pp] cancel: stopping current scan
[mustek_pp] config_ccd: 100 dpi, mode 1, invert 0, size 5100
[mustek_pp] config_ccd: 600 dpi, mode 2, invert 0, size 5100
[mustek_pp] read: delivering 32768 bytes
[mustek_pp] read: device isn't scanning
[mustek_pp] sane_mustek_pp_read(v1.0.6-alpha): line 4053: debug exception
scanimage: sane_read: Operation was cancelled
[mustek_pp] close: maybe waiting for lamp...
[mustek_pp] config_ccd: 100 dpi, mode 1, invert 0, size 5100
[mustek_pp] config_ccd: 600 dpi, mode 2, invert 0, size 5100
[mustek_pp] close: device closed
[mustek_pp] exit: (...)
-- Anthony-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Wed Aug 16 2000 - 04:00:39 PDT