Mustek ScanMagic 4830S

From: Anton Hattendorf (anton.hattendorf@gmx.de)
Date: Mon Mar 27 2000 - 03:39:33 PST

  • Next message: Pete Phillips: "sane 1.0.2 - "Invalid argument""

    Hello
    I've got a Mustek ScanMagic 4830S and the following problem:
    the scanner is found by the controller but if I start scanimmage I just
    get a error message
    I've listed the outputs of everything which belongs to SCSI below.
    Can someone help me?
    Thanks
    Anton

    -----------------------------------------------------------------
    friedrich: ~ > cat /proc/scsi/scsi
    Attached devices:
    Host: scsi0 Channel: 00 Id: 02 Lun: 00
      Vendor: Model: Flatbed Scanner Rev: 1.03
      Type: Scanner ANSI SCSI revision: 02
    Host: scsi0 Channel: 00 Id: 03 Lun: 00
      Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.01
      Type: CD-ROM ANSI SCSI revision: 02
    Host: scsi0 Channel: 00 Id: 04 Lun: 00
      Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
    -----------------------------------------------------------------------
    friedrich: ~ > cat /proc/scsi/ncr53c8xx/0
    General information:
      Chip NCR53C810a, device id 0x1, revision id 0x12
      IO port address 0xe800, IRQ number 9
      Using memory mapped IO at virtual address 0xc480e000
      Synchronous period factor 25, max commands per lun 32
    -----------------------------------------------------------------------
    friedrich: ~ > scsicheck
    sg0 scsi0 ch0 ID2 Lun0 ansi2 Scanner(6) Model: Flatbed Scanner Rev:
    1.03
     Flatbed Scanner 1.03
        $_aspi = "sg0:Scanner:2" (or "0/0/2/0:Scanner:2")
    sg1 scsi0 ch0 ID3 Lun0 ansi2 CD-ROM(5) PLEXTOR CD-ROM PX-20TS 1.01
        $_aspi = "sg1:CD-ROM:3" (or "0/0/3/0:CD-ROM:3")
    sg2 scsi0 ch0 ID4 Lun0 ansi2 CD-ROM(5) SCSI-CD ReWritable-2x2x6 2.00
        $_aspi = "sg2:CD-ROM:4" (or "0/0/4/0:CD-ROM:4")
    -----------------------------------------------------------------------
    friedrich:~ # find-scanner
    find-scanner: found scanner " Flatbed Scanner 1.03" at device
    /dev/scanner
    find-scanner: found scanner " Flatbed Scanner 1.03" at device /dev/sg0
    find-scanner: found scanner " Flatbed Scanner 1.03" at device /dev/sga
    -----------------------------------------------------------------------
    friedrich:~ # scanimage -d mustek:/dev/scanner
    scanimage: open of device mustek:/dev/scanner failed: Invalid argument
    -----------------------------------------------------------------------
    friedrich:~ # ls -l /dev/sg*
    crwxrwxrwx 1 root disk 21, 0 Nov 8 20:48 /dev/sg0
    crw-r----- 1 root disk 21, 1 Nov 8 20:48 /dev/sg1
    crw-r----- 1 root disk 21, 10 Nov 8 20:48 /dev/sg10
    crw-r----- 1 root disk 21, 11 Nov 8 20:48 /dev/sg11
    crw-r----- 1 root disk 21, 12 Nov 8 20:48 /dev/sg12
    crw-r----- 1 root disk 21, 13 Nov 8 20:48 /dev/sg13
    crw-r----- 1 root disk 21, 14 Nov 8 20:48 /dev/sg14
    crw-r----- 1 root disk 21, 15 Nov 8 20:48 /dev/sg15
    crw-r----- 1 root disk 21, 2 Nov 8 20:48 /dev/sg2
    crw-r----- 1 root disk 21, 3 Nov 8 20:48 /dev/sg3
    crw-r----- 1 root disk 21, 4 Nov 8 20:48 /dev/sg4
    crw-r----- 1 root disk 21, 5 Nov 8 20:48 /dev/sg5
    crw-r----- 1 root disk 21, 6 Nov 8 20:48 /dev/sg6
    crw-r----- 1 root disk 21, 7 Nov 8 20:48 /dev/sg7
    crw-r----- 1 root disk 21, 8 Nov 8 20:48 /dev/sg8
    crw-r----- 1 root disk 21, 9 Nov 8 20:48 /dev/sg9
    lrwxrwxrwx 1 root root 3 Dec 25 17:05 /dev/sga -> sg0
    lrwxrwxrwx 1 root root 3 Dec 25 17:05 /dev/sgb -> sg1
    lrwxrwxrwx 1 root root 3 Dec 25 17:05 /dev/sgc -> sg2
    lrwxrwxrwx 1 root root 3 Dec 25 17:05 /dev/sgd -> sg3
    -----------------------------------------------------------------------
    friedrich:~ # ls -l /dev/scanner
    lrwxrwxrwx 1 root root 8 Mar 7 19:31 /dev/scanner ->
    /dev/sg0
    -----------------------------------------------------------------------
    friedrich:~ # cat /etc/sane.d/mustek.conf
    # See sane-mustek(5) for documentation.

    # option strip-height 1.5

    /dev/scanner
    -----------------------------------------------------------------------
    friedrich:~ # scanimage -L
    -----------------------------------------------------------------------
    friedrich:~ # xscanimage mustek:/dev/scanner
    ( Fenste mit dem Text "scanimage: open of device mustek:/dev/scanner
    failed: Invalid argument"

    Gtk-CRITICAL **: file gtkmain.c: line 534 (gtk_main_quit): assertion
    `main_loops != NULL' failed.
    -----------------------------------------------------------------------
    friedrich:~ # xsane
    xsane: error in loading shared libraries: libsane-dll.so.1: cannot open
    shared object file: No such file or directory
    -----------------------------------------------------------------------

    Penguins can't fly.
    Someone who can't fly, couldn't crash

    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Mon Mar 27 2000 - 03:28:57 PST