I appologize if I have not sent this message to the right address, please
forward it on if that is the case.
I am working with an HP scanner coupled to my printer through the parallel
port. I believe I have sucessfully installed sane and added lines to the
/etc/services and /etc/inetd.conf.
[root@wiz tools]# ./find-scanner -v
find-scanner: searching for scanners:
find-scanner: checking /dev/scanner...
find-scanner: checking /dev/sg0...
find-scanner: found disk "IBM DDRS-34560W S97B" at device /dev/sg0
find-scanner: checking /dev/sg1...
find-scanner: found disk "IBM DDRS-39130W S71D" at device /dev/sg1
find-scanner: checking /dev/sg2...
find-scanner: found CD-drive "TEAC CD-ROM CD-532S 1.0A" at device /dev/sg2
find-scanner: checking /dev/sg3...
find-scanner: found CD-drive "YAMAHA CRW4260 1.0h" at device /dev/sg3
find-scanner: checking /dev/sg4...
find-scanner: found tape "SONY SDT-7000 0300" at device /dev/sg4
find-scanner: checking /dev/sg5...
find-scanner: found disk "IOMEGA ZIP 100 J.03" at device /dev/sg5
find-scanner: checking /dev/sg6...
find-scanner: checking /dev/sg7...
find-scanner: checking /dev/sg8...
find-scanner: checking /dev/sg9...
find-scanner: checking /dev/sga...
find-scanner: found disk "IBM DDRS-34560W S97B" at device /dev/sga
find-scanner: checking /dev/sgb...
find-scanner: found disk "IBM DDRS-39130W S71D" at device /dev/sgb
find-scanner: checking /dev/sgc...
find-scanner: found CD-drive "TEAC CD-ROM CD-532S 1.0A" at device /dev/sgc
find-scanner: checking /dev/sgd...
find-scanner: found CD-drive "YAMAHA CRW4260 1.0h" at device /dev/sgd
find-scanner: checking /dev/sge...
find-scanner: found tape "SONY SDT-7000 0300" at device /dev/sge
find-scanner: checking /dev/sgf...
find-scanner: found disk "IOMEGA ZIP 100 J.03" at device /dev/sgf
find-scanner: checking /dev/sgg...
find-scanner: checking /dev/sgh...
find-scanner: checking /dev/sgi...
.
.
.
Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.
List of available devices:
pnm:0 pnm:1
and I can not reconcile exactly what/where pnm:0 and pnm:1 are.
My scanner is on lp1. Or maybe I am using the wrong package for this type
of connection.
Any help you can offer will be appreciated.
_____________________________________________________
Debi-Lee Wilkinson
Geophysical Institute
University of Alaska Fairbanks
907-474-6105
debi@wiz.gi.alaska.edu
http://www.magnet.gi.alaska.edu
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com