As root, type,
rmmod aic7xxx
insmod aic7xxx_old
The old driver works me, I was getting the same symptoms with that kernel and
scanner. It might work for you.
Dave
On Friday 06 July 2001 00:17, you wrote:
> Hello,
>
> I am running the 2.4.6 kernel and sane-backends 1.05. As with
> sane-backends 1.04 I immediately get the following error when I type
> "scanimage -d hp:/dev/scanner" as root:
>
> scanimage: open of device hp:/dev/scanner failed: Error during device I/O
>
> I get no sound from the scanner, no light, nothing other than the error
> message on the screen. If I reboot with the 2.2.18 kernel everything
> works fine. I am not sure
> whether there is still a timeout issue as with 1.04, but I do see that
> sanei_scsi.c has timeout commands everywhere. The line,
> "req->sgdata.sg3.hdr.timeout = 1000 * 60 * 10;" is present in
> sanei_scsi.c. Sane-find-scanner indicates the following:
>
> sane-find-scanner: found processor "HP C2520A 3644" at device /dev/scanner
>
> which seems to indicate a scanner (HP6100C) at /dev/scanner. I am really
> getting frustrated at this point, but the problem must be with sane and
> the 2.4 kernel. Does anybody have any ideas on what to try next?
>
> Thanks,
>
> Ivan Milos
>
>
>
> --
> Source code, list archive, and docs: http://www.mostang.com/sane/
> To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Thu Jul 05 2001 - 22:43:04 PDT