-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello:
I have got my new System up and running I have a ASUS A7V mobo installed with
default settings. I am running SuSE 7.2. My problem is that the HP scanjet
4200C is just not seen by xsane. I have worked with SuSE tech support and
others but still have no joy. I have sane 1.0.4 and xsane 0.74. Everything
is properly configured as far as I can see. I have modified the hp backend
has been modified to read /dev/usb/scanner0
option connect-device.
But no joy I have followed the SuSE manual etc. The SuSE tech has stated that
the scanner is logged in by the system and is seen in /proc/bus/usb/devices
as Vendor=03f0 and ProdID=0105. But xsane and sane does not see any scanner.
My device and driver file follows:
itty:~ # cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=058f ProdID=9254 Rev= 1.00
S: Manufacturer=ALCOR
S: Product=Generic USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=0105 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl= 1ms
kitty:~ # cat /proc/bus/usb/drivers
usbdevfs
hub
hid
48- 63: usbscanner
My two nick cards share the IRQ 9 with the USB hubs but that does not seem to
matter as I could not get xsane to see scanner with them moved and no sharing
of IRQ 9. I have not applied the patch at hp 4200 backend as it is not
compliled against the 1.0.4 sane stuff. I also have been lead to believe it
was not needed. Any help greatful accepted, as I have hit bottom on this and
exhausted my knowledge well.
Thanks in advance.
Ralph
- --
It said uses Windows 98 or better so I installed SuSE 7.2
Proud user of SuSE 7.2 Professional
Register Linux User 168814 ICQ #49993234
GPG Public Key available at http://www.keyserver.net
Key fingerprint = 6426 1CFF 0987 9D51 76D6 06BC F22A CFF4 559A 03E7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE7Qoz/8irP9FWaA+cRAoL3AKCjDm3Q21RIodmzdSupQvUs0JNfqgCcDuPz
ddy7lqf3wXLL/bscYdIbr40=
=j8pB
-----END PGP SIGNATURE-----
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Tue Jul 03 2001 - 20:20:08 PDT