Mustek 1200 USB Plus on Linux 2.4.5

From: Frantisek Hanzlik (f-hanzlik@volny.cz)
Date: Sat Jun 30 2001 - 08:36:22 PDT

  • Next message: Henning Meier-Geinitz: "Re: Mustek 1200 USB Plus on Linux 2.4.5"

    Greetings all,

    I have Mustek USB scanner "1200 USB Plus" type and I can't install it on Linux
    2.4.5/RH 7.1 with SANE (v1.0.3 and CVS-2001-06-10) and generic USB scanner driver from
    kernel. I tried add option for driver "options scanner vendor=0x055f product=0x007",
    driver and dependent modules (scanner, usb-uhci, usbcore) are properly loaded and scanner
    is present in "/proc/bus/usb/devices". I add line "mustek_usb" to the file
    "/etc/sane.d/dll.conf" and created file "/etc/sane.d/mustek_usb.conf"
    containing lines "usb /dev/scanner" and " option connect-device".
    "/dev/scanner" is symbolic link to "/dev/usb/scanner0".
    But when i run scanimage with any option (eg "-L" or "-T"), system print (12 times)
    message "usb_control/bulk_msg: timeout" and then message
    "scanner.c: read_scanner(0): excessive NAK's received".

    There is my "/proc/bus/usb/devices" :
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=d800
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
    D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB UHCI Root Hub
    S: SerialNumber=d400
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
    T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
    D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=055f ProdID=0007 Rev= 1.00
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 64mA
    I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=usbscanner
    E: Ad=01(O) Atr=02(Bulk) MxPS= 2 Ivl= 0ms
    E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
    E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl= 1ms

            Can any advise me with this problem? Is possible any debugging
    (it is probably unsupported scanner) or any other solution?

    Thanks,
    Frantisek Hanzlik

    == Na Mezi 14A ==> LINUX systemy <== Tel: +420 19 7242272 ==
    == 317 00 Plzen e-mail:f-hanzlik@volny.cz Fax: +420 19 7242285 ==
    == Czech Republic http://www.volny.cz/f-hanzlik GSM: +420 604 117319 ==

    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Sat Jun 30 2001 - 08:26:24 PDT