Re: HP backend slow? / Saned problems

From: Mick Barry (mick@objects.com.au)
Date: Tue May 01 2001 - 02:08:20 PDT

  • Next message: stef: "Re: New backend: UMAX 1220P sane'ification take 1"

    Apr 25 01:28:38 donald kernel: sym53c416.c: Version 1.0.0
    Apr 25 01:28:38 donald kernel: scsi0 : Symbios Logic 53c416 (rev. 151)
    at 0x220, irq 12, SCSI-ID 7, fast pio
    Apr 25 01:28:38 donald kernel: scsi : 1 host.
    Apr 25 01:28:38 donald kernel: Vendor: HP Model:
    C5110A Rev: 3638
    Apr 25 01:28:39 donald kernel: Type:
    Processor ANSI SCSI revision: 02

    Peter Kirchgessner wrote:
    >
    > Without opening the box it is difficult. But you can give two hints.
    > What are the options that you are using to configure the kernel module ?
    > And which messages appear in /var/log/messages upon recognition of the
    > scanner. This is what is shown for a NCR (Symbios-Logic) card with an
    > 8150-chip (non-HP card) on recognition of a Scanjet 5p:
    >
    > Mar 24 17:11:14 algol kernel: ncr53c815-0: releasing host resources
    > Mar 24 17:11:14 algol kernel: ncr53c815-0: resetting chip
    > Mar 24 17:11:14 algol kernel: ncr53c815-0: host resources successfully
    > released
    > Mar 24 17:11:14 algol kernel: scsi : 0 hosts.
    > Mar 24 17:11:17 algol kernel: ncr53c8xx: at PCI bus 0, device 9,
    > function 0
    > Mar 24 17:11:17 algol kernel: ncr53c8xx: 53c815 detected
    > Mar 24 17:11:17 algol kernel: ncr53c815-0: rev=0x03, base=0xec001000,
    > io_port=0xe400, irq=9
    > Mar 24 17:11:17 algol kernel: ncr53c815-0: ID 7, Fast-10, Parity
    > Checking
    > Mar 24 17:11:17 algol kernel: ncr53c815-0: restart (scsi reset).
    > Mar 24 17:11:17 algol kernel: scsi0 : ncr53c8xx - version 3.2a-2
    > Mar 24 17:11:17 algol kernel: scsi : 1 host.
    > Mar 24 17:11:21 algol kernel: Vendor: HP Model:
    > C5110A Rev:
    > 3638
    > Mar 24 17:11:21 algol kernel: Type:
    > Processor ANSI
    > SCSI revision: 02
    >
    > -- Peter
    >
    > Mick Barry wrote:
    > >
    > > I'm using a Scanjet 5P with a Symbios Logic card w/out any problems.
    > > How do I find out exactrly which card it is (w/out opening my box up)?
    > >
    > > Peter Kirchgessner wrote:
    > > >
    > > > Hello,
    > > >
    > > > this is the first report that I see where the HP-cards work well with
    > > > the scanner under Linux. Could you specify which HP-card you have. A
    > > > Symbios Logic 53C400A or 53C416 or something else ?
    > > >
    > > > --Peter
    > > >
    > <snip>
    > > --
    > > Source code, list archive, and docs: http://www.mostang.com/sane/
    > > To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    >
    > --
    > Peter Kirchgessner
    > http://www.kirchgessner.net
    > mailto:peter@kirchgessner.net
    > (alternate e-mail: pkirchgessner@t-online.de)

    --
    Source code, list archive, and docs: http://www.mostang.com/sane/
    To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
    



    This archive was generated by hypermail 2b29 : Tue May 01 2001 - 02:00:42 PDT