[sanei_debug] Setting debug level of umax to 255.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 24
[umax] compiled with old pipe for inter-process-data-transfer
[umax] (C) 1997-2000 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch@Wolfsburg.DE
[umax] umax-scsi-maxqueue = 4
[umax] attach_matching_devices(scsi KYE ColorPage-HR5)
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] could not open /proc/scsi/scsi for reading
[umax] attach_matching_devices(/dev/scanner)
[umax] attach_scanner: /dev/scanner
[umax] attach_scanner: opening /dev/scanner
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] could not open /proc/scsi/scsi for reading
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] could not open /proc/scsi/scsi for reading
[sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes
[sanei_scsi] sanei_scsi_open: SG driver version: 30117
[sanei_scsi] sanei_scsi_open_extended: using 16384 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 2
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] sanei_scsi_open: using new SG header structure
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue = 4
[umax] backend runs on little endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[sanei_scsi] scsi_req_enter: entered 0x8054d10
[sanei_scsi] sanei_scsi.issue: 0x8054d10
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=16384 (res)sgat=0 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     rb>> rcv: id=0 blen=5 dur=10ms sgat=0 op=0x12
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8054d10
[sanei_scsi] sanei_scsi.issue: 0x8054d10
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[sanei_scsi] scsi_req_enter: entered 0x8054d10
[sanei_scsi] sanei_scsi.issue: 0x8054d10
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=16384 (res)sgat=0 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     rb>> act: id=1 blen=160 t_o/elap=600000/20ms sgat=0 op=0x12
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8054d10
[sanei_scsi] sanei_scsi.issue: 0x8054d10
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[umax] Found KYE  scanner ColorPage-HR5 version V2.7 on device /dev/scanner
[umax] umax_correct_inquiry("KYE  ColorPage-HR5  V2.7")
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax] 
[umax] vendor........................: 'KYE     '
[umax] product.......................: 'ColorPage-HR5   '
[umax] version.......................: 'V2.7'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax] 
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax] 
[umax] ISO  Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax] 
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax] 
[umax] scsi features (00):
[umax] -------------------
[umax] 
[umax] f/w support function:
[umax] ---------------------
[umax]  - quality calibration
[umax]  - fast preview function
[umax] 
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax] 
[umax] scan modes (76):
[umax] ----------------
[umax]  - single pass color mode
[umax]  - lineart mode
[umax]  - gray mode
[umax]  - color mode
[umax]  - transparency (UTA)
[umax] 
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax]  - send high byte first
[umax]  - bi-level image reverse
[umax]  - multi-level image reverse
[umax]  - paper length can reach to 14 inch
[umax] 
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) download
[umax] gamma input   8 bits/pixel support
[umax] gamma input  10 bits/pixel support
[umax] gamma output  8 bits/pixel support
[umax] gamma output 10 bits/pixel support
[umax] 
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax] 
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax] 
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax] 
[umax] maximum video memory......................: 223 KB
[umax] 
[umax] reserved byte 0x72 = 0
[umax] 
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax] 
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 13.90 inch
[umax] 
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 11.60 inch
[umax] 
[umax] reserved byte 0x82 = 0
[umax] 
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax] 
[umax] reserved byte 0x8e = 0
[umax] 
[umax] last calibration lamp density.............: 0
[umax] 
[umax] reserved byte 0x90 = 0
[umax] 
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax] 
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax] 
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf:    color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax] 
[umax] reserved byte 0x9e = 0
[umax] 
[umax] ==================== end of inquiry ====================
[umax] 
[umax] x_range.max = 215.899994
[umax] y_range.max = 353.059998
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] sane_open
[umax] Using 10 bits for gamma input
[umax] init_options
[umax] set mode [#2] to Color
[umax] get (no name) [#0]
[umax] get (no name) [#0]
[umax] sane_get_option_descriptor 0
[umax] sane_get_option_descriptor 1
[umax] sane_get_option_descriptor 2
[umax] sane_get_option_descriptor 3
[umax] sane_get_option_descriptor 4
[umax] sane_get_option_descriptor 5
[umax] sane_get_option_descriptor 6
[umax] sane_get_option_descriptor 7
[umax] sane_get_option_descriptor 8
[umax] sane_get_option_descriptor 9
[umax] sane_get_option_descriptor 10
[umax] sane_get_option_descriptor 11
[umax] get br-x [#11]
[umax] sane_get_option_descriptor 12
[umax] get br-y [#12]
[umax] sane_get_option_descriptor 13
[umax] sane_get_option_descriptor 14
[umax] sane_get_option_descriptor 15
[umax] sane_get_option_descriptor 16
[umax] sane_get_option_descriptor 17
[umax] sane_get_option_descriptor 18
[umax] sane_get_option_descriptor 19
[umax] sane_get_option_descriptor 20
[umax] sane_get_option_descriptor 21
[umax] sane_get_option_descriptor 22
[umax] sane_get_option_descriptor 23
[umax] sane_get_option_descriptor 24
[umax] sane_get_option_descriptor 25
[umax] sane_get_option_descriptor 26
[umax] sane_get_option_descriptor 27
[umax] sane_get_option_descriptor 28
[umax] sane_get_option_descriptor 29
[umax] sane_get_option_descriptor 30
[umax] sane_get_option_descriptor 31
[umax] sane_get_option_descriptor 32
[umax] sane_get_option_descriptor 33
[umax] sane_get_option_descriptor 34
[umax] sane_get_option_descriptor 35
[umax] sane_get_option_descriptor 36
[umax] sane_get_option_descriptor 37
[umax] sane_get_option_descriptor 38
[umax] sane_get_option_descriptor 39
[umax] sane_get_option_descriptor 40
[umax] sane_get_option_descriptor 41
[umax] sane_get_option_descriptor 42
[umax] sane_get_option_descriptor 43
[umax] sane_get_option_descriptor 44
[umax] sane_get_option_descriptor 45
[umax] sane_get_option_descriptor 46
[umax] sane_get_option_descriptor 47
[umax] sane_get_option_descriptor 48
[umax] sane_get_option_descriptor 49
[umax] sane_get_option_descriptor 50
[umax] sane_get_option_descriptor 51
[umax] sane_get_option_descriptor 52
[umax] sane_get_option_descriptor 53
[umax] sane_get_option_descriptor 54
[umax] sane_get_option_descriptor 55
[umax] sane_get_option_descriptor 56
[umax] sane_get_option_descriptor 57
[umax] get tl-x [#9]
[umax] get tl-y [#10]
[umax] get tl-x [#9]
[umax] sane_get_option_descriptor 11
[umax] set br-x [#11] to 215.899994
[umax] get tl-y [#10]
[umax] sane_get_option_descriptor 12
[umax] set br-y [#12] to 353.059998
[umax] sane_start
[sanei_debug] Setting debug level of sanei_scsi to 255.
[sanei_scsi] sanei_scsi_open: SG driver version: 30117
[sanei_scsi] sanei_scsi_open_extended: using 456704 bytes as SCSI buffer
[sanei_scsi] trying to enable low level command queueing
[sanei_scsi] sanei_scsi_open: Host adapter queue depth: 2
[sanei_scsi] sanei_scsi_open: SG driver can change buffer size at run time
[sanei_scsi] sanei_scsi_open: low level command queueing enabled
[sanei_scsi] sanei_scsi_open: using new SG header structure
[umax] sane_start: sanei_scsi_open_extended returned scsi buffer size = 456704
[umax] sane_start: buffer size has changed, reallocating buffer
[umax] sane_start: freeing SCSI buffer[0]
[umax] sane_start: allocating SCSI buffer[0]
[umax] initialize_values
[umax] grab_scanner
[umax] wait_scanner
[sanei_scsi] scsi_req_enter: entered 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=456704 (res)sgat=14 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     act: id=2 blen=0 t_o/elap=600000/20ms sgat=0 op=0x00
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[umax] scanner ready
[sanei_scsi] scsi_req_enter: entered 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=456704 (res)sgat=14 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     rcv: id=3 blen=0 dur=10ms sgat=0 op=0x16
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[umax] scanner reserved
[umax] Using 10 bits for gamma input
[umax] Using 8 bits for output
[umax] check_values
[umax] using one pass scanning mode
[umax] scanner uses color-pixel-ordering
[umax] sane_get_parameters
[umax] x_resolution (dpi)      = 100
[umax] y_resolution (dpi)      = 100
[umax] x_coordinate_base (dpi) = 1200
[umax] y_coordinate_base (dpi) = 1200
[umax] upper_left_x (xbase)    = 0
[umax] upper_left_y (ybase)    = 0
[umax] scanwidth    (xbase)    = 10198
[umax] scanlength   (ybase)    = 16678
[umax] width in pixels         = 850
[umax] length in pixels        = 1390
[umax] bits per pixel/color    = 8
[umax] bytes per line          = 2550
[umax] pixels_per_line         = 850
[umax] lines                   = 1390
[umax] negative                = 0
[umax] threshold  (lineart)    = 127
[umax] brightness (halftone)   = 127
[umax] contrast   (halftone)   = 127
[umax] analog_gamma            = 0 0 0
[umax] highlight               = 255 255 255
[umax] shadow                  = 0 0 0
[umax] calibrat. exposure time = 0 0 0
[umax] scan exposure time      = 0 0 0
[umax] shading type number     = 1
[umax] calibration mode number = 0
[umax] quality calibration     = 0
[umax] fast preview function   = 0
[umax] DOR                     = 0
[umax] ADF                     = 0
[umax] slow scan speed         = 0
[umax] smear                   = 0
[umax] paso 1
[umax] set_window_param
[umax] window descriptor block created with 82 bytes
[sanei_scsi] scsi_req_enter: entered 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=456704 (res)sgat=14 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     rb>> act: id=4 blen=254 t_o/elap=600000/20ms sgat=0 op=0x24
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[umax] window(s) set
[umax] paso 2
[umax] start_scan
[umax] starting scan
[sanei_scsi] scsi_req_enter: entered 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=456704 (res)sgat=14 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     rb>> rcv: id=5 blen=1 dur=10ms sgat=0 op=0x1b
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
[sanei_scsi] sanei_scsi_req_wait: read 64 bytes
[umax] do_calibration
[umax] wait_scanner
[sanei_scsi] scsi_req_enter: entered 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=456704 (res)sgat=14 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     act: id=6 blen=0 t_o/elap=600000/20ms sgat=0 op=0x00
[sanei_scsi] scsi_req_enter: queue_used: 1, queue_max: 2
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x8050cf0
[sanei_scsi] sanei_scsi.issue: 0x8050cf0
scanimage: stopping scanner... (sig 2)
[umax] sane_cancel
[umax] do_cancel
[umax] trying to reposition scanner ...
[sanei_scsi] scsi_req_enter: entered 0x8050d90
[sanei_scsi] sanei_scsi.issue: 0x8050d90
dev_max(currently)=7 max_active_device=1 (origin 1)
 scsi_dma_free_sectors=48 sg_pool_secs_aval=320 def_reserved_size=32768
 >>> device=sg0 scsi0 chan=0 id=5 lun=0   em=0 sg_tablesize=255 excl=1
   FD(1): timeout=600000ms bufflen=456704 (res)sgat=14 low_dma=0
   cmd_q=1 f_packid=0 k_orphan=0 closed=0
     act: id=6 blen=0 t_o/elap=600000/45500ms sgat=0 op=0x00
     act: id=7 blen=0 t_o/elap=600000/20ms sgat=0 op=0x31
[sanei_scsi] scsi_req_enter: queue_used: 2, queue_max: 2
scanimage: sanei_scsi.c:1954: sanei_scsi_req_wait: La declaraci?n `req == ((fdparms*)fd_info[req->fd].pdata)->sane_qhead' no se cumple.