Hi !
it's me again ;)
I have some additions to my microtek scanmaker 636 problem.
This is _no_ misconfiguration on my site and i'll explain you why:
If i run the scanner under win2000 and then boot linux on the same mashiene
everything goes well, but if i switch off the scanner and then reboot
linux it doesn't work anymore.
ok, i decided to do this again 'cause it's incredible for me, but i can
reproduce it. Windows must send a "magic" command to the scanner.
(i tried it on a friend's computer too, winNT+debian woody)
I used xsane 0.70 (debian woddy package).
root@darkstar:~# cat /etc/sane.d/dll.conf
microtek
microtek2
root@darkstar:~# cat /etc/sane.d/microtek2.conf
# See sane-microtek2(5) for a description of the options
option dump 1
# option lightlid-35 on
# option no-backtrack-option on
scsi * * Scanner
root@darkstar:~#
Contact me, if you need additional information about my setup or something else.
I hope anyone can help me out of this.
On Thu, 25 Jan 2001, Nils Gundelach wrote:
> Hello,
>
> I don't know if this is the right place to post, forgive me if it's not :)
>
> I run a Microtek Scanmaker 636 together with a Tekram dc-395.
>
> dc-395 -> scanner(TERM)
>
> If i don't disable "Allow disconnect" in the scsi bios i get the following
> error message:
>
> Jan 22 03:21:13 darkstar kernel: scsi : aborting command due to timeout : p=
> id
> 0, scsi1, channel 0, id 6, lun 0 Read (10) 00 83 00 60 00 00 00 00 00
> Jan 22 03:21:13 darkstar kernel: DC395x_abort: pid=3D0, target=3D06-0
> Jan 22 03:21:13 darkstar kernel: DC395x: abort: Lower SyncFreq to for dev
> 06-0!
> Jan 22 03:21:13 darkstar kernel: pid 0(28666):28 00..(6-0) Start 00 60 MI=
> P1
> #MIP0(02).MIP1 #MIP0(04).DISC +abort (SN)!*
> Jan 22 03:21:13 darkstar kernel: TmpSRB:
> Jan 22 03:21:13 darkstar kernel: DC395x: Aborted pid 0 with status 0
> Jan 22 03:21:14 darkstar kernel: DC395x: Disc: SRB_ABORT_SENT!
> Jan 22 03:21:14 darkstar kernel: DC395x_DoingSRB_Done: pids (G)pid
> 0(28666):28 00..(6-0) Start 00 60 MIP1 #MIP0(02).MIP1 #MIP0(04).DISC +abort
> (SN)!RSel ##MOP1#(06 )DISC Reset(29749):00050000*
>
> The scanner doesn't allow synchronous scsi, so i set the asynchron option in
> my scsi bios, no success :/
> I tried this also with my adaptec 7890 (Asus P2B-s) and result was the same.
> If i leave this option enabled, the scanner scans 1/4 of a page and then
> stops. The image is full off red, green, blue lines... (the same with 7890)
>
> I thought the scanner is broken, but i tested the scanner by a friend and it
> works fine. He also uses Debian (woody) with kernel 2.4.0.
>
> I played with several options in the scsi bios but nothing helped. I had th=
> is
> working some time ago...
> Maybe anyone can kick me into the right direction.
>
> some information about the system:
>
> root@darkstar:~# cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 01f0-01f7 : ide0
> 02f8-02ff : serial(set)
> 0378-037a : parport0
> 03c0-03df : vga+
> 03c0-03df : matrox
> 03f6-03f6 : ide0
> 03f8-03ff : serial(set)
> 0cf8-0cff : PCI conf1
> b000-b0ff : ESS Technology ES1968 Maestro 2
> b000-b0ff : ESS Maestro 2
> b400-b4ff : Tekram Technology Co.,Ltd. TRM-S1040
> b400-b47f : DC395x_TRM
> b800-b83f : 3Com Corporation 3c905 100BaseTX [Boomerang]
> b800-b83f : eth0
> d000-d0ff : Adaptec AHA-2940U2/W / 7890
> d000-d0fe : aic7xxx
> d400-d41f : Intel Corporation 82371AB PIIX4 USB
> d800-d80f : Intel Corporation 82371AB PIIX4 IDE
> e400-e43f : Intel Corporation 82371AB PIIX4 ACPI
> e800-e81f : Intel Corporation 82371AB PIIX4 ACPI
> root@darkstar:~#
>
>
> t@darkstar:~# cat /proc/interrupts
> CPU0
> 0: 989203 XT-PIC timer
> 1: 8615 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 5: 47045 XT-PIC eth0
> 9: 14560 XT-PIC aic7xxx, bttv
> 10: 18 XT-PIC DC395x_TRM
> 11: 351761 XT-PIC ESS Maestro 2
> 12: 111130 XT-PIC PS/2 Mouse
> 14: 131712 XT-PIC ide0
> NMI: 0
> LOC: 0
> ERR: 0
> root@darkstar:~#
>
thx Nils
--
(°- Get my Key "gpg --keyserver wwwkeys.eu.pgp.net --recv-key 45CD0073" -°)
//\ Key fingerprint = F4D9 9274 6ED8 B227 A62A 33FA 0D2E 2414 45CD 0073 /\\
V_/_ www.darktec.org /|\ eject@IRCNet on #irc.de #linux.de #linuxger _\_V
*** Premature optimization is the root of all evil. - D. Knuth ***
--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com
This archive was generated by hypermail 2b29 : Thu Jan 25 2001 - 10:52:15 PST