[sanei_init_debug]: Setting debug level of microtek to 128. [microtek] sane_init: MICROTEK says hello! (v0.10.1) [microtek] sane_init: config- b0t4l0[microtek] attach_scanner: b0t4l0 [microtek] attach_scanner: opening b0t4l0 [sanei_init_debug]: Setting debug level of sanei_scsi to 128. [sanei_scsi] OS/2: installed adapters 1 [sanei_scsi] OS/2: ASPI manager is 'OS2ASPI Dev Mgr AHA-1520/1522 ' [sanei_scsi] OS/2: host adapter is 'AHA-1520/1522 ' [sanei_scsi] OS/2: unique id is '' [sanei_scsi] open_aspi: open temporary file 'asa00034' [sanei_scsi] OS/2: adapter#00 'AHA-1520/1522 ' [sanei_scsi] OS/2: id#00 status=82h [sanei_scsi] OS/2: id#01 status=82h [sanei_scsi] OS/2: id#02 status=82h [sanei_scsi] OS/2: id#03 status=82h [sanei_scsi] OS/2: id#04 status=01h [sanei_scsi] OS/2: type is 'scanner' [sanei_scsi] OS/2 ' Scanner 1.80SCSI F/WV3.4 CTL5380OŒÅî_' [sanei_scsi] OS/2: id#05 status=82h [sanei_scsi] OS/2: id#06 status=82h [sanei_scsi] open_aspi: close temporary file 'asa00034' [microtek] attach_scanner: sending INQUIRY [sanei_scsi] OS/2: ASPI closed [microtek] id_microtek... [microtek] parse_inquiry... [microtek] dump_inquiry... === SANE/Microtek backend v0.10.1 === ========== Scanner Inquiry Block ========mm 06 31 14 01 5b 00 00 00 20 20 20 20 20 20 20 20 53 63 61 6e 6e 65 72 20 20 20 20 20 20 20 20 20 31 2e 38 30 53 43 53 49 20 46 2f 57 56 33 2e 34 20 43 54 4c 35 33 38 30 03 4f 8c c5 02 ee 5f 03 01 03 01 00 00 83 00 01 0e 0e 01 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ========== Scanner Inquiry Report ========== ===== Scanner ID... Device Type Code: 0x06 Model Code: 0x5f Vendor Name: ' ' Model Name: 'Scanner ' Vendor Specific String: 'SCSI F/WV3.4 CTL5380' Firmware Rev: '1.80' SCSI F/W version: 3.1 Scanner F/W version: 1.4 Response data format: 0x01 ===== Imaging Capabilities... Modes: Lineart Halftone Gray Color (OnePass) Resolution Step Sizes: 1% 5% Expanded Resolution Support? yes Supported Bits Per Sample: 4 8 Max. document size code: 0x02 Max. document size: 2549 x 3505 pixels Frame units: pixels 1/8"'s # of built-in halftones: 12 Downloadable patterns? Yes Data Compression: Contrast Settings: 14 Exposure Settings: 14 Adjustable Shadow/Highlight? yes Adjustable Midtone? yes Digital brightness/offset? yes Gamma Table Size: 256 entries of 1 bytes (max. value: 255) ===== Source Options... Feed type: flatbed ADF support? yes Document Feeder Support? yes Feeder Backtracking? yes Feeder Installed? no Feeder Ready? no Transparency Adapter Installed? no Fast Color Prescan? no Selectable Transfer Format? no Color Transfer Sequence: line-by-line, non-sequential with headers Three pass scan support? no ModeSelect-1 and ModeSense-1 Support? yes Can Disable Linearization Table? no Can Disable Start-of-Scan Recalibration? yes Internal expanded expansion? no [microtek] attach_scanner: happy. [microtek] sane_open [microtek] sane_open: find device... [microtek] sane_open: create scanner... [microtek] sane_open: initialize scanner dependent stuff... [microtek] sane_open: init gamma tables... [microtek] sane_open: init pass-time variables... [microtek] sane_open: init clever cache... [microtek] sane_open: initialize options: [microtek] init_options... [microtek] init_options: quant yes [microtek] init_options: done. [microtek] sane_control_option (opt=0,act=0,val=0x282fe98,info=0) [microtek] sane_control_option (opt=0,act=0,val=0x282fe48,info=0) [microtek] sane_get_option_descriptor (0)... [microtek] sane_get_option_descriptor (1)... [microtek] sane_get_option_descriptor (2)... [microtek] sane_get_option_descriptor (3)... [microtek] sane_get_option_descriptor (4)... [microtek] sane_get_option_descriptor (5)... [microtek] sane_get_option_descriptor (6)... [microtek] sane_get_option_descriptor (7)... [microtek] sane_get_option_descriptor (8)... [microtek] sane_get_option_descriptor (9)... [microtek] sane_get_option_descriptor (10)... [microtek] sane_get_option_descriptor (11)... [microtek] sane_get_option_descriptor (12)... [microtek] sane_get_option_descriptor (13)... [microtek] sane_control_option (opt=13,act=0,val=0x201e8,info=0) [microtek] sane_get_option_descriptor (14)... [microtek] sane_control_option (opt=14,act=0,val=0x201ec,info=0) [microtek] sane_get_option_descriptor (15)... [microtek] sane_get_option_descriptor (16)... [microtek] sane_get_option_descriptor (17)... [microtek] sane_get_option_descriptor (18)... [microtek] sane_get_option_descriptor (19)... [microtek] sane_get_option_descriptor (20)... [microtek] sane_get_option_descriptor (21)... [microtek] sane_get_option_descriptor (22)... [microtek] sane_get_option_descriptor (23)... [microtek] sane_get_option_descriptor (24)... [microtek] sane_get_option_descriptor (25)... [microtek] sane_get_option_descriptor (26)... [microtek] sane_get_option_descriptor (27)... [microtek] sane_get_option_descriptor (28)... [microtek] sane_get_option_descriptor (29)... [microtek] sane_get_option_descriptor (30)... [microtek] sane_get_option_descriptor (31)... [microtek] sane_get_option_descriptor (32)... [microtek] sane_control_option (opt=11,act=0,val=0x282fe44,info=0) [microtek] sane_control_option (opt=12,act=0,val=0x282fe44,info=0) [microtek] sane_get_option_descriptor (4)... [microtek] sane_get_option_descriptor (4)... [microtek] sane_control_option (opt=4,act=1,val=0x37ca8,info=0x282fe14) scanimage: unrecognized option `--calib_once=yes' [microtek] sane_exit... [microtek] sane_close... [microtek] sane_exit: MICROTEK says goodbye.