Re: Problems with Umax 1220S

• Messages sorted by: [ date ][ thread ][ subject ][ author ]
• Next message: Cyril Y. Nickonorov: "Re: Problems with Umax 1220S"
• Previous message: PAILOTT@aol.com: "Re: Problems with Umax 1220S"
• Maybe in reply to: Cyril Y. Nickonorov: "Problems with Umax 1220S"
• Next in thread: Cyril Y. Nickonorov: "Re: Problems with Umax 1220S"

> Hello to All!
>
> Please help me to figure out any possible solution to
> my problem.
>
> I have the following configuration:
>
> Linux RH 6.0 on K6-2 box and
> Umax Astra 1220S connected to Adaptec AHA1542 SCSI host.
> SANE 1.0.1 as backend and XSANE as frontend.
>
> Both sane and xsane compiled without any errors and were
> installed perfectly. But when I try to scan image, scanner
> lamp moves forward for about half of an inch and then goes
> back without making any scan job. Log shows that scanner was
> initialized well, but "scan-read can't get data from scanner".
>
> What's going wrong?
>

Do you have terminated both ends of the scsi bus?
May be it hast to do with the ISA SCSI card,
do you have the possibility to try a PCI-SCSI card
(but not the cheap!)

Bye
Oliver

--
Homepage:       http://www.wolfsburg.de/~rauch
sane-umax:      http://www.wolfsburg.de/~rauch/sane/sane-umax.html
xsane:          http://www.wolfsburg.de/~rauch/sane/sane-xsane.html
E-Mail:         mailto:Oliver.Rauch@Wolfsburg.DE




--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com





 Next message: Cyril Y. Nickonorov: "Re: Problems with Umax 1220S"
 Previous message: PAILOTT@aol.com: "Re: Problems with Umax 1220S"
 Maybe in reply to: Cyril Y. Nickonorov: "Problems with Umax 1220S"

 Next in thread: Cyril Y. Nickonorov: "Re: Problems with Umax 1220S"