Yes they look something like this:
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] scsi_req_wait: waiting for 0x804de60
[sanei_scsi] scsi_req_issue: issued 0x804de60
Ive got a 4c attached to a BT-930 to which nothing else is attached. My hard
drive is attached to a BT-950 which works wonderfully. I'm using the sane from
the sane-1.00-1.i386.rpm
My /proc/scsi looks like this:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU Model: M2954ESP SUN4.2G Rev: 2848
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: HP Model: C2520A Rev: 3503
Type: Processor ANSI SCSI revision: 02
And the probe of the BT-930 at startup looks like:
***** BusLogic SCSI Driver Version 2.0.15 of 17 August 1998 *****
Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
Configuring BusLogic Model BT-930 PCI Ultra SCSI Host Adapter
Firmware Version: 5.02, I/O Address: 0x6200, IRQ Channel: 15/Level
PCI Bus: 0, Device: 20, Address: 0xE0801000, Host Adapter SCSI ID: 7
Parity Checking: Enabled, Extended Translation: Enabled
Synchronous Negotiation: FNFFFFF#, Wide Negotiation: Disabled
Disconnect/Reconnect: YNYYYYY#, Tagged Queuing: YNYYYYY#
Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments
Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
Error Recovery Strategy: Default, SCSI Bus Reset: Enabled
SCSI Bus Termination: Enabled, SCAM: Disabled
*** BusLogic BT-930 Initialized Successfully ***
Target 1: Queue Depth 3, Asynchronous
Current Driver Queue Depth: 255
Currently Allocated CCBs: 28
And all the stuff I can capture from the scanimage session by telnetting from
another host:
$ scanimage -d hp:/dev/scanner -h
[sanei_init_debug]: Setting debug level of dll to 128.
[dll] adding backend abaton
[dll] adding backend agfafocus
[dll] adding backend apple
[dll] adding backend artec
[dll] adding backend canon
[dll] adding backend coolscan
[dll] adding backend dc25
[dll] adding backend dc210
[dll] adding backend dmc
[dll] adding backend epson
[dll] adding backend hp
[dll] adding backend microtek
[dll] adding backend microtek2
[dll] adding backend mustek
[dll] adding backend pint
[dll] adding backend pnm
[dll] adding backend qcam
[dll] adding backend ricoh
[dll] adding backend s9036
[dll] adding backend snapscan
[dll] adding backend tamarack
[dll] adding backend umax
Usage: scanimage [OPTION]...
Start image acquisition on a scanner device and write PNM image data to
standard output.
-d, --device-name=DEVICE use a given scanner device
-h, --help display this help message and exit
-L, --list-devices show available scanner devices
-v, --verbose give even more status messages
-V, --version print version information
[dll] loading backend hp
[dll] dlopen()ing `/usr/lib/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[sanei_init_debug]: Setting debug level of hp to 128.
[hp] init called
[sanei_init_debug]: Setting debug level of sanei_scsi to 128.
[hp] scsi_inquire: sending INQUIRE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 72 bytes
[hp] scsi_new: sending TEST_UNIT_READY
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 2 bytes:
0x0000 1B 45 .E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 50 20 20 20 20 20 20 .*s257d0VP
[hp] probe_scanner: Probing /dev/scanner
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 30 45 .*s10E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 30 64 35 57 31 37 35 30 41 20 20 20 .*s10d5W1750A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] probe_scanner: Scanjet IIc compatible
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 73 39 45 .*s9E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 39 64 4E 35 57 31 37 35 30 41 20 20 20 .*s9dN5W1750A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] scl_inq: parameter '' (9) unsupported
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 31 45 .*s11E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 31 64 35 57 32 35 30 30 41 20 20 20 .*s11d5W2500A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] probe_scanner: Scanjet IIcx compatible
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 32 45 .*s12E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 32 64 35 57 32 35 32 30 41 20 20 20 .*s12d5W2520A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] probe_scanner: Scanjet 4c/3c compatible
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 34 45 .*s14E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 34 64 4E 57 32 35 32 30 41 20 20 20 .*s14dNW2520A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] scl_inq: parameter '' (14) unsupported
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 35 45 .*s15E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 35 64 4E 57 32 35 32 30 41 20 20 20 .*s15dNW2520A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] scl_inq: parameter '' (15) unsupported
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 36 45 .*s16E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 36 64 4E 57 32 35 32 30 41 20 20 20 .*s16dNW2520A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] scl_inq: parameter '' (16) unsupported
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 31 37 45 .*s17E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 31 37 64 4E 57 32 35 32 30 41 20 20 20 .*s17dNW2520A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] scl_inq: parameter '' (17) unsupported
[hp] scsi_flush: writing 6 bytes:
0x0000 1B 2A 73 32 31 45 .*s21E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 60 bytes
[hp] scsi_read: 24 bytes:
0x0000 1B 2A 73 32 31 64 4E 57 32 35 32 30 41 20 20 20 .*s21dNW2520A
0x0010 43 32 35 32 30 41 20 20 C2520A
[hp] scl_inq: parameter '' (21) unsupported
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 35 52 .*s10325R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 35 70 30 56 30 41 20 20 20 .*s10325p0V0A
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 35 4C .*s10325L
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 35 6B 30 56 30 41 20 20 20 .*s10325k0V0A
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 35 48 .*s10325H
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 35 67 35 32 56 41 20 20 20 .*s10325g52VA
[hp] choice_option_probe_each: 'mode': val, min, max = 0, 0, 52
[hp] choice_option_probe_each: test all values for 'mode' separately
[hp] probe_scanner: Probing /dev/scanner
[hp] probe_scanner: use cached compatibility flags
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 30 54 .*a0T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 35 32 56 41 20 20 20 .*s257d0V52VA
[hp] probed_choice: value 0 supported
[hp] probe_scanner: Probing /dev/scanner
[hp] probe_scanner: use cached compatibility flags
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 33 54 .*a3T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 35 32 56 41 20 20 20 .*s257d0V52VA
[hp] probed_choice: value 3 supported
[hp] probe_scanner: Probing /dev/scanner
[hp] probe_scanner: use cached compatibility flags
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 34 54 .*a4T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 35 32 56 41 20 20 20 .*s257d0V52VA
[hp] probed_choice: value 4 supported
[hp] probe_scanner: Probing /dev/scanner
[hp] probe_scanner: use cached compatibility flags
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 35 54 .*a5T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 35 32 56 41 20 20 20 .*s257d0V52VA
[hp] probed_choice: value 5 supported
[hp] choice_option_probe_each: restore previous value 0 for 'mode'
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 30 54 .*a0T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 33 52 .*s10323R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 33 70 33 30 30 56 20 20 20 .*s10323p300V
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 33 4C .*s10323L
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 33 6B 31 32 56 56 20 20 20 .*s10323k12VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 33 48 .*s10323H
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 33 67 31 36 30 30 56 20 20 .*s10323g1600V
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 34 52 .*s10324R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 34 70 33 30 30 56 56 20 20 .*s10324p300VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 34 4C .*s10324L
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 34 6B 31 32 56 56 56 20 20 .*s10324k12VVV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 32 34 48 .*s10324H
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 32 34 67 31 36 30 30 56 20 20 .*s10324g1600V
[hp] scsi_flush: writing 8 bytes:
0x0000 1B 2A 73 31 30 32 38 45 .*s1028E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 32 38 64 33 30 30 56 30 56 20 20 .*s1028d300V0V
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 31 37 52 .*s10317R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 31 37 70 30 56 56 30 56 20 20 .*s10317p0VV0V
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 31 37 4C .*s10317L
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 31 37 6B 2D 31 32 37 56 20 20 .*s10317k-127V
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 31 37 48 .*s10317H
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 31 37 67 31 32 37 56 56 20 20 .*s10317g127VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 31 36 52 .*s10316R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 31 36 70 30 56 37 56 56 20 20 .*s10316p0V7VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 31 36 4C .*s10316L
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 31 36 6B 2D 31 32 37 56 20 20 .*s10316k-127V
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 31 36 48 .*s10316H
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 31 36 67 31 32 37 56 56 20 20 .*s10316g127VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 33 30 37 52 .*s10307R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 33 30 37 70 30 56 37 56 56 20 20 .*s10307p0V7VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 39 35 36 52 .*s10956R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 39 35 36 70 30 56 37 56 56 20 20 .*s10956p0V7VV
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 31 44 .*a1D
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 30 56 37 56 56 20 20 .*s257d0V0V7VV
[hp] probe_download_type: Download type 1 supported
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 61 31 44 .*a1D
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 30 56 37 56 56 20 20 .*s257d0V0V7VV
[hp] probe_download_type: Download type 1 supported
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 39 36 35 52 .*s10965R
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 39 36 35 70 32 56 37 56 56 20 20 .*s10965p2V7VV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 39 36 35 4C .*s10965L
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 39 36 35 6B 2D 31 56 56 56 20 20 .*s10965k-1VVV
[hp] scsi_flush: writing 9 bytes:
0x0000 1B 2A 73 31 30 39 36 35 48 .*s10965H
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 31 30 39 36 35 67 36 56 56 56 56 20 20 .*s10965g6VVVV
[hp] choice_option_probe_each: 'matrix-type': val, min, max = 2, -1, 6
[hp] choice_option_probe_each: test all values for 'matrix-type' separately
[hp] probed_choice: value -256 is emulated
[hp] probe_scanner: Probing /dev/scanner
[hp] probe_scanner: use cached compatibility flags
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 75 30 54 .*u0T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 36 56 56 56 56 20 20 .*s257d0V6VVVV
[hp] probed_choice: value 0 supported
[hp] probe_scanner: Probing /dev/scanner
[hp] probe_scanner: use cached compatibility flags
[hp] scsi_flush: writing 4 bytes:
0x0000 1B 2A 6F 45 .*oE
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 5 bytes:
0x0000 1B 2A 75 35 54 .*u5T
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[hp] scsi_flush: writing 7 bytes:
0x0000 1B 2A 73 32 35 37 45 .*s257E
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 36 bytes
[sanei_scsi] scsi_req_enter: entered 0x804de60
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x804de60
[sanei_scsi] sanei_scsi.issue: 0x804de60
[sanei_scsi] sanei_scsi_req_wait: read 52 bytes
[hp] scsi_read: 16 bytes:
0x0000 1B 2A 73 32 35 37 64 30 56 36 56 56 56 56 20 20 .*s257d0V6VVVV
[
/proc/interrupts:
0: 105810 timer
1: 2 keyboard
2: 0 cascade
9: 18984 WD8013
10: 0 + Sound Blaster 16
11: 2 + cyclomY
12: 53936 + BusLogic BT-950
13: 1 math error
14: 26567 + ide0
15: 17 + BusLogic BT-930
/proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
01f0-01f7 : ide0
0220-022f : Sound Blaster 16
0240-025f : WD8013
0330-0331 : Sound Blaster 16 - MPU-401
0378-037f : lp
03c0-03df : vga+
03e8-03ef : serial(set)
03f6-03f6 : ide0
6100-61ff : BusLogic BT-950
6200-62ff : BusLogic BT-930
f000-f007 : IDE DMA
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com