I don't understand your question :-)
> my scanner is a mustek 12000SP (Single Pass) and afaik not currently
> supported by SANE ;-(
>
> ::: OUTPUT OF /PROC/SCSI/SCSI :::
> Attached devices:
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
> Vendor: SCANNER Model: Rev: 1.03
> Type: Scanner ANSI SCSI revision: 01 CCS
> ::: OUTPUT OF /PROC/SCSI/SCSI :::
>
> ::: OUTPUT OF scanimage :::
> scanimage: no SANE devices found
> ::: OUTPUT OF scanimage :::
>
> the SCSI board is the PAS16-SCSI adapter on the PAS16 from MediaVision.
>
> i connected the scanner with a cable from the so called "computer" port
> (25pol ?)
> of the scanner with an adaptor to the scsi-I connector of the
> soundcard's
> scsi-host.
>
> the other scanner-port is called "scsi-port" and is a mini-sub-d.
>
> my computer dealer told me to use this adaptor instead of an cable with
> a mini-sub-d,
> because of the price (aqdapter costs about 12$ and cable with mini-sub-d
> around 35$).
>
> i hope that's correct to use this cable as the scsi-host found the
> scanner.
>
> ps: my sane version is 0.63
If it works it's ok - if not: why don't you switch to a newer version
of sane? :-)))
Regards
Wolfgang
-- Source code, list archive, and docs: http://www.mostang.com/sane/ To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com