CanoScan 300 SCSI scanner setup problem

Durk Talsma (D.Talsma@direct.a2000.nl)
Mon, 07 Sep 1998 19:17:01 +0000

Hello everybody,

Recently, I discovered the SANE project, and would very much like to use
it for running
a scanner on my l Linux box. I haven't been very succesful in getting my
scanner recognized though, using
sane 0.74

I have a Canon Canoscan 300 flatbed scanner, configured for LUN 03 and a
ncr810 SCSI host adapter.
My kernel is configured with generic SCSI support, and have found the
generic SCSI devices /dev/sga
through /dev/sgh. No, I'm not much of a SCSI expert, but assuming that
/dev/sgd correspondes with LUN 03,
I set up a symbolic link from /dev/sgd to /dev/scanner.

Futhermore, in /etc/sane.d/dll.conf, I included a line that reads canon.
I found no cano.conf in /etc/sane.d/ so I made
one. This file simply states /dev/scanner.

Following the documentation, I figured out that this would approximately
the way to set up a scanner using sane,
but so far, I have not been able to get anything working. If anybody has
an idea, please let me know.

B.t.w, even though I might not be very worhwhile as a developer for
SANE, when I get my scanner working, I'm
more than willing to test the canon backends.

Regards,
Durk

--
-----------------------------------------------------------------------
You can contact me at:
pn_talsma@macmail.psy.uva.nl          (work)
talsma@uvapsy.psy.uva.nl         (more work)
d.talsma@direct.a2000.nl      (home at last)

Or visit my website at: http://people.a2000.nl/dtals ---------------------------------------------------------------------- "Dave, this conversation can serve no further purpose anymore, goodbye"

- HAL 9000 -

--
Source code, list archive, and docs: http://www.mostang.com/sane/
To unsubscribe: echo unsubscribe sane-devel | mail majordomo@mostang.com