Supported Scanners - Search Engine


Manufacturer
Model Name
Bus Type
USB (new) Vendor-ID  Product-ID  (input four-digit hex numbers, e.g. 05d8 and 4002)

Backend Version Supported Devices Manual Page
Manufacturer Model Interface USB id Status Comment
Backends included in the current tarball - see SANE Distribution
mustek_pp 13 (unmaintained) Medion/Lifetec/Tevion/Cytron MD 9848 Parport (EPP)   good 300 dpi CCD scanner sane-mustek_pp
MD 9806 Parport (EPP)   good 300 dpi CCD scanner
MD/LT 935x Parport (EPP)   good 600x1200 dpi CIS scanner
MD/LT 985x Parport (EPP)   good 600x1200 dpi CIS scanner
MD/LT 9890 Parport (EPP)   good 600x1200 dpi CIS scanner
Backends included in the development repository - see SANE git Access
mustek_pp 13 (unmaintained) Medion/Lifetec/Tevion/Cytron MD 9848 Parport (EPP)   good 300 dpi CCD scanner sane-mustek_pp
MD 9806 Parport (EPP)   good 300 dpi CCD scanner
MD/LT 935x Parport (EPP)   good 600x1200 dpi CIS scanner
MD/LT 985x Parport (EPP)   good 600x1200 dpi CIS scanner
MD/LT 9890 Parport (EPP)   good 600x1200 dpi CIS scanner

Legend:

Backend:
Name of the backend.
The link (if present) points to more extensive and detailed information, if it exists, or the email address of the author or maintainer.
Version:
Version of backend/driver; newer versions may be available from their home sites.
Manufacturer:
Manufacturer, vendor or brand name of the device.
Model:
Name of the the device.
Interface:
How the device is connected to the computer.
USB id:
The USB vendor/product IDs (if applicable)
Status:
Indicates how many of the features the device provides are supported by SANE.
  • NEW! means brand-new to the current release of SANE.
  • UNMAINTAINED means that nobody maintains that backend. Expect no new features or newly supported devices. You are welcome to take over maintainership.
  • unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
  • untested means the device may be supported but couldn't be tested. Be very careful and report success/failure.
  • minimal means that the device is detected and scans at least in one mode. But the quality is bad or important features won't work.
  • basic means it works at least in the most important modes but quality is not perfect.
  • good means the device is usable for day-to-day work. Some rather exotic features may be missing.
  • complete means the backends supports everything the device can do.
Comment:
More information about the backend or model, e.g. the level of support and possible problems.
Manual Page:
A link to the man-page online, if it exists.


SANE homepage
Contact
This page was last updated on Sun Oct 05 2003